How much does a concrete driveway cost in Bullock County?

A 400 square foot concrete driveway in Bullock County costs between $3,080 and $5,720, with an average of $4,225. This reflects the 0.88x local cost adjustment based on Alabama's average concrete worker wage of $22.67 per hour.

Why is concrete work cheaper in Bullock County than the national average?

Labor rates drive the difference. Alabama cement masons earn $22.67 per hour compared to the national average of $28.33 per hour. Since labor represents about 60% of project costs, this creates an 0.88x services adjustment on total pricing.

What weather risks should I consider for concrete in this area?

Bullock County has a Very Low overall FEMA risk score of 25.25. Hurricane risk (76.18) and tornado risk (56.74) are the primary concerns, both rated Relatively Low. Proper reinforcement and expansion joints address these risks effectively.

When is the best time to pour concrete in Bullock County?

The IECC Zone 3A climate allows year-round concrete work, though spring and fall offer ideal conditions. Summer pours may require early morning scheduling to avoid rapid curing in high heat. Winter work remains feasible given the Very Low winter weather risk score of 3.76.

How many concrete contractors serve Bullock County?

Alabama has 440 cement masons and concrete finishers statewide. As a non-metro county, Bullock County draws contractors from surrounding areas. Expect potential mobilization fees and book several weeks ahead during busy seasons.

How does a concrete patio compare to a driveway in cost?

A 400 square foot patio slab costs $2,640 to $5,280 (average $3,695), while the same size driveway runs $3,080 to $5,720 (average $4,225). Driveways cost more due to thicker slabs and heavier reinforcement requirements for vehicle loads.

Can I finance concrete work with a home equity loan?

Yes. With current 30-year mortgage rates at 6.36% and the county median home value at $79,400, a $4,225 driveway financed over 20 years costs approximately $26 monthly. Home equity lines of credit and contractor financing are also available options.

REGIONAL COST GUIDE · Bullock County, AL

How Much Does Concrete Work Cost in Bullock County, AL?

Concrete driveways in Bullock County cost $3,080-$5,720. Local labor rates average $22.67/hr with 440 workers statewide.

Cost range $3,080 – $5,720

Average $4,225

Updated May 17, 2026

Compare Free Concrete Quotes

COST BREAKDOWN

What homeowners in Bullock County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Concrete Driveway (400 sq ft)

$3,080 Avg: $4,225 $5,720

Patio Slab (400 sq ft)

$2,640 Avg: $3,695 $5,280

Sidewalk Section (50 linear ft)

$705 Avg: $1,055 $1,585

National avg $4,800 × 0.88x local adjustment = $4,225

Why Bullock County prices look like this.

Alabama employs 440 cement masons and concrete finishers statewide, with an average hourly wage of $22.67 (or $47,150 annually). This labor rate, combined with regional material costs, results in a 0.88x services adjustment compared to national pricing. For Bullock County homeowners, that translates to concrete driveway installations running $3,080 to $5,720 for a standard 400 square foot project. Patio slabs of similar size range from $2,640 to $5,280, while a 50 linear foot sidewalk section costs between $705 and $1,585. The county's median home value sits at $79,400 with median property taxes of $309 per year, making concrete improvements a practical investment for enhancing curb appeal and property value in this rural Alabama market.

Labor Costs and Contractor Availability

Concrete work in Bullock County draws from Alabama's statewide pool of 440 cement masons and concrete finishers. The state average wage of $22.67 per hour ($47,150 annually) falls below the national average of $28.33 per hour, which contributes to the 0.88x local cost adjustment. As a non-metro county, Bullock County contractors may travel from nearby areas, potentially adding mobilization fees for smaller projects. Labor accounts for roughly 60% of total concrete project costs, with the remaining 40% going toward materials like ready-mix concrete, rebar, forms, and finishing supplies. When requesting quotes, homeowners should confirm whether travel charges apply and ask about scheduling, as rural contractors often book several weeks in advance during peak spring and summer months.

Weather Risks and Concrete Durability

Bullock County carries an overall FEMA risk score of 25.25 (Very Low), though certain hazards warrant consideration for concrete projects. Hurricane risk scores 76.18 (Relatively Low) and tornado risk scores 56.74 (Relatively Low), meaning proper reinforcement and expansion joints remain worthwhile investments. Flood risk is minimal at 20.17 (Very Low), reducing concerns about water damage to foundations and slabs. Winter weather risk is extremely low at 3.76, so freeze-thaw cycling poses less threat to concrete surfaces than in northern states. Lightning risk at 40.24 (Relatively Low) does not directly impact concrete but may affect project scheduling during summer storm season. Contractors in this region can pour concrete most of the year without significant weather delays.

Climate Considerations for Concrete Work

Bullock County falls within IECC Climate Zone 3A, characterized by a mixed-humid climate in the DOE's Southeast HVAC region. This zone experiences warm summers and mild winters, creating favorable conditions for concrete installation throughout much of the year. The moisture regime (designated 'A' for humid) means concrete curing requires attention to humidity levels, as excessive moisture can affect finishing and strength development. Hot summer temperatures may necessitate early morning pours or the use of retarders to prevent rapid setting. The mild winter climate allows for extended construction seasons compared to northern regions, though contractors should still monitor overnight temperatures during December through February. Proper curing practices, including keeping fresh concrete moist for several days, help achieve optimal strength in this climate.

Energy Costs and Concrete Equipment

Alabama's residential electricity rate of $0.162 per kWh (as of February 2026) affects both concrete production and homeowner operating costs. While concrete itself requires no ongoing energy, related systems like radiant floor heating in slabs or electric concrete cutters draw power during installation. Decorative concrete with embedded heating elements will add to monthly utility bills. For homeowners considering solar integration, Bullock County receives 5.42 peak sun hours daily, generating approximately 8,491 kWh annually from a 6kW rooftop system. At current rates, that offsets roughly $1,375 in annual electricity costs. Concrete patios and driveways provide stable mounting surfaces for ground-mounted solar arrays, and reflective concrete finishes can reduce cooling loads on adjacent structures by minimizing heat absorption.

Financing Your Concrete Project

With the current 30-year mortgage rate at 6.36% (as of May 14, 2026), Bullock County homeowners have several financing options for concrete work. A $4,225 driveway financed through a home equity line of credit at similar rates would cost approximately $26 monthly over 20 years. The county's median home value of $79,400 means a concrete driveway represents roughly 5% of total property value, a reasonable improvement ratio. Home improvement loans and contractor financing plans offer alternatives, though interest rates on unsecured loans run higher. For rental property owners, fair market rents range from $576 (studio) to $1,302 (4-bedroom) monthly, and durable concrete improvements can justify modest rent increases while reducing long-term maintenance costs compared to gravel or asphalt surfaces.

Move on this

Compare Concrete quotes in Bullock County, AL.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Concrete Providers Near You

Enter your ZIP to see rated concrete pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about concrete in Bullock County.

Short answers to the most common things we hear about local pricing, scope, and timing.

How much does a concrete driveway cost in Bullock County?

A 400 square foot concrete driveway in Bullock County costs between $3,080 and $5,720, with an average of $4,225. This reflects the 0.88x local cost adjustment based on Alabama's average concrete worker wage of $22.67 per hour.
Why is concrete work cheaper in Bullock County than the national average?

Labor rates drive the difference. Alabama cement masons earn $22.67 per hour compared to the national average of $28.33 per hour. Since labor represents about 60% of project costs, this creates an 0.88x services adjustment on total pricing.
What weather risks should I consider for concrete in this area?

Bullock County has a Very Low overall FEMA risk score of 25.25. Hurricane risk (76.18) and tornado risk (56.74) are the primary concerns, both rated Relatively Low. Proper reinforcement and expansion joints address these risks effectively.
When is the best time to pour concrete in Bullock County?

The IECC Zone 3A climate allows year-round concrete work, though spring and fall offer ideal conditions. Summer pours may require early morning scheduling to avoid rapid curing in high heat. Winter work remains feasible given the Very Low winter weather risk score of 3.76.
How many concrete contractors serve Bullock County?

Alabama has 440 cement masons and concrete finishers statewide. As a non-metro county, Bullock County draws contractors from surrounding areas. Expect potential mobilization fees and book several weeks ahead during busy seasons.
How does a concrete patio compare to a driveway in cost?

A 400 square foot patio slab costs $2,640 to $5,280 (average $3,695), while the same size driveway runs $3,080 to $5,720 (average $4,225). Driveways cost more due to thicker slabs and heavier reinforcement requirements for vehicle loads.
Can I finance concrete work with a home equity loan?

Yes. With current 30-year mortgage rates at 6.36% and the county median home value at $79,400, a $4,225 driveway financed over 20 years costs approximately $26 monthly. Home equity lines of credit and contractor financing are also available options.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.