How much does a standing seam metal roof cost in Sacramento County?

A standing seam metal roof replacement in Sacramento County averages **$24,200**, with a typical range of **$16,500 to $33,000**. This reflects a 1.1x adjustment over national prices due to local roofer wages of $32.01/hr.

Is metal roofing worth it for wildfire protection in Sacramento?

Yes. Sacramento County has a wildfire risk score of 95.93 (Relatively Moderate), and metal roofing carries a Class A fire rating. Unlike asphalt shingles, metal panels resist ignition from airborne embers and can help protect your home during fire events.

How much cheaper is corrugated metal compared to standing seam?

Corrugated metal roofing averages **$15,400** in Sacramento County compared to **$24,200** for standing seam, a savings of approximately $8,800 or 36%. Corrugated systems have exposed fasteners that may require more maintenance over time.

Will a metal roof reduce my air conditioning costs?

Sacramento County experiences 1,576 cooling degree-days annually, creating moderate AC demand. Reflective metal roofing can reduce cooling costs by 10-25%. At California's $0.332/kWh electricity rate, this translates to meaningful annual savings.

Can I install solar panels on a metal roof?

Metal roofing is ideal for solar. Sacramento County receives 5.87 kWh/m² of daily solar radiation, and a 6kW system produces about 9,669 kWh annually. Standing seam metal allows clamp-on solar mounting without roof penetrations.

How much does metal roof repair cost in Sacramento County?

Metal roof repairs in Sacramento County range from **$440 to $2,200**, with an average of **$1,100**. Minor repairs like replacing fasteners or sealing small leaks fall at the lower end, while panel replacement or flashing repairs cost more.

How do Sacramento labor costs affect metal roofing prices?

Local roofers earn $32.01/hr (17% above the $27.45 national average), and the metro area employs about 1,800 roofing professionals. Labor accounts for 40-60% of total project cost, resulting in the 1.1x local price adjustment applied to national averages.

REGIONAL COST GUIDE · Sacramento County, CA

How Much Does Metal Roofing Cost in Sacramento County, CA?

Metal roofing in Sacramento County costs $11,000 to $33,000. Get local labor rates, wildfire considerations, and financing options.

Cost range $16,500 – $33,000

Average $24,200

Updated May 17, 2026

Compare Free Metal Roofing Quotes

COST BREAKDOWN

What homeowners in Sacramento County actually pay.

Local market ranges built from regional labor, materials, and permitting data — not national averages.

Standing Seam Metal Roof (full replacement)

$16,500 Avg: $24,200 $33,000

Corrugated Metal Roof (full replacement)

$11,000 Avg: $15,400 $22,000

Metal Roof Repair

$440 Avg: $1,100 $2,200

National avg $22,000 × 1.1x local adjustment = $24,200

Why Sacramento County prices look like this.

Take advantage of Sacramento County's 5.87 peak sun hours daily by pairing your metal roof upgrade with solar panel installation, since metal roofing provides an ideal mounting surface that can last 50+ years. A full metal roof replacement in this market runs between $11,000 and $33,000, depending on material choice and roof complexity. Standing seam systems average $24,200 while corrugated options come in around $15,400. These figures reflect the local labor market, where roofers earn $32.01/hr compared to the national average of $27.45/hr. With median home values at $498,900 in this area, a metal roof represents roughly 3-5% of property value while delivering significant long-term savings on energy and replacement costs.

Sacramento County Labor Costs for Metal Roofing

The Sacramento-Roseville-Folsom metro area employs approximately 1,800 professional roofers with an average hourly wage of $32.01 and annual earnings around $66,590. This wage premium of 17% over the national average reflects California's higher cost of living and strong demand for skilled trades. Labor typically accounts for 40-60% of total project costs for metal roofing installations. The remaining expense covers materials, which pass through at closer to national rates. Your final project cost incorporates both factors through a 1.1x services adjustment that accounts for local wage conditions while recognizing that raw materials like steel and aluminum panels are priced more uniformly across regions.

Wildfire and Flood Considerations for Metal Roofs

Sacramento County carries a 98.12 overall risk score from FEMA's National Risk Index, placing it in the Relatively High category. Two hazards stand out for roofing decisions: wildfire risk at 95.93 (Relatively Moderate) and inland flood risk at 98.98 (Relatively High). Metal roofing earns a Class A fire rating, the highest available, making it an excellent choice for properties in wildfire-prone areas. Unlike asphalt shingles that can ignite from airborne embers, metal panels resist combustion and shed debris effectively. Hail risk scores lower at 53.91, and while metal can dent from large hailstones, modern standing seam systems handle moderate hail without functional damage. Winter weather poses minimal concern here with a score of just 6.56.

Climate Zone 3B: What It Means for Your Roof

Sacramento County falls within IECC Climate Zone 3B, characterized as warm-dry in the DOE's Southwest HVAC region. With only 2,138 heating degree-days annually (42% below the national median of 3,700 HDD), winter heating demands stay relatively low. Cooling loads matter more here, with 1,576 cooling degree-days pushing into the moderate tier. This mixed climate profile favors reflective metal roofing finishes that reduce summer heat absorption while still providing adequate insulation value for mild winters. Light-colored or cool-coated metal panels can lower roof surface temperatures by 50-100°F compared to dark asphalt, translating directly to reduced air conditioning runtime. Annual precipitation of just 0.2 inches means corrosion concerns are minimal for properly coated metal systems.

Energy Savings and Solar Compatibility

California's residential electricity rate of $0.332/kWh ranks among the highest in the nation, amplifying the value of any roofing choice that reduces cooling loads. Metal roofs with reflective coatings can cut cooling costs by 10-25% compared to traditional materials. Sacramento County receives 5.87 kWh/m² daily of solar radiation, making it one of the better locations for rooftop solar. A reference 6kW solar system here produces approximately 9,669 kWh annually at an 18.4% capacity factor. Metal roofing pairs exceptionally well with solar installations. Standing seam systems allow clamp-on mounting without penetrating the roof surface, while the 40-50 year lifespan of metal exceeds the 25-30 year warranty period of most solar panels, eliminating the need to remove panels for a mid-life roof replacement.

Financing Your Metal Roof Investment

With current 30-year mortgage rates at 6.36% as of May 2026, many homeowners consider cash-out refinancing or home equity products to fund major improvements. Sacramento County's median home value of $498,900 (2.89x the national average) provides substantial equity for most long-term owners. A $24,200 standing seam installation financed over 10 years at current rates adds roughly $270-300 to monthly payments. Property taxes averaging $3,768 annually remain stable after improvements since California's Proposition 13 limits reassessment. Some contractors offer manufacturer financing with promotional rates, and federal energy efficiency incentives may apply to qualifying reflective roofing products. Request itemized quotes from multiple installers, as material and labor splits vary significantly between companies.

Move on this

Compare Metal Roofing quotes in Sacramento County, CA.

Tell us about your project — we'll match you with up to three licensed, insured pros nearby. Usually within 24 hours.

Get Free Quotes Free · No obligation

Find Local Metal Roofing Providers Near You

Enter your ZIP to see rated metal roofing pros serving your area.

ZIP code

FREQUENTLY ASKED · 07

Questions buyers ask about metal roofing in Sacramento County.

Short answers to the most common things we hear about local pricing, scope, and timing.

How much does a standing seam metal roof cost in Sacramento County?

A standing seam metal roof replacement in Sacramento County averages **$24,200**, with a typical range of **$16,500 to $33,000**. This reflects a 1.1x adjustment over national prices due to local roofer wages of $32.01/hr.
Is metal roofing worth it for wildfire protection in Sacramento?

Yes. Sacramento County has a wildfire risk score of 95.93 (Relatively Moderate), and metal roofing carries a Class A fire rating. Unlike asphalt shingles, metal panels resist ignition from airborne embers and can help protect your home during fire events.
How much cheaper is corrugated metal compared to standing seam?

Corrugated metal roofing averages **$15,400** in Sacramento County compared to **$24,200** for standing seam, a savings of approximately $8,800 or 36%. Corrugated systems have exposed fasteners that may require more maintenance over time.
Will a metal roof reduce my air conditioning costs?

Sacramento County experiences 1,576 cooling degree-days annually, creating moderate AC demand. Reflective metal roofing can reduce cooling costs by 10-25%. At California's $0.332/kWh electricity rate, this translates to meaningful annual savings.
Can I install solar panels on a metal roof?

Metal roofing is ideal for solar. Sacramento County receives 5.87 kWh/m² of daily solar radiation, and a 6kW system produces about 9,669 kWh annually. Standing seam metal allows clamp-on solar mounting without roof penetrations.
How much does metal roof repair cost in Sacramento County?

Metal roof repairs in Sacramento County range from **$440 to $2,200**, with an average of **$1,100**. Minor repairs like replacing fasteners or sealing small leaks fall at the lower end, while panel replacement or flashing repairs cost more.
How do Sacramento labor costs affect metal roofing prices?

Local roofers earn $32.01/hr (17% above the $27.45 national average), and the metro area employs about 1,800 roofing professionals. Labor accounts for 40-60% of total project cost, resulting in the 1.1x local price adjustment applied to national averages.

SOURCES · 08

How these numbers were built.

Cost estimates are derived from government data including the U.S. Census Bureau (ACS), Bureau of Labor Statistics (OEWS), FEMA National Risk Index, EIA energy data, IECC climate zone classifications, Federal Reserve (FRED), and HUD Fair Market Rents.